Welcome to Integrated Engineering

Integrated Engineering

Grid View

List View

View:

Sort by:

Page 1 of 3.
Go to: 1 | 2 | 3 | ... Next >

		.063 inch Oil Restrictor This product will save your T series turbo from quickly blowing its oil seals. T series turbochargers need a maximum of about 30psi of oil pressure to function properly, exceed this, and eventually...	$13.49 Compare At: $17.06

		1/2 inch NPT Steel Weld Bung This is a quick easy way to add a 1/2 NPT port to your stainless or mild steel piece. Simply drill a hole and weld on the bung. "	$6.49 Compare At: $8.21

		1/4 inch NPT Steel Weld Bung This is a quick easy way to add a 1/4 NPT port to your stainless or mild steel piece. Simply drill a hole and weld on the bung. "	$5.49 Compare At: $6.94

		1/8 inch NPT Steel Weld Bung This product is designed to gaurd against EGT pyrometer probe failures by pulling the probe further back out of the exhaust stream, reducing mechanical stresses on the probe, while still allowing it...	$3.99 Compare At: $5.05

		10mm Copper Crush Washer Seal Ring for Banjo Fitting	$1.79

		12MM to -6 Hose Barb Banjo Fitting	$10.99 Compare At: $14.99

		12MM x 1.50 Banjo Bolt	$8.99 Compare At: $14.99

		12mm Aluminum Crush Washer Seal Ring for Banjo Fitting	$0.99

		12mm Copper Crush Washer Seal Ring for Banjo Fitting	$0.99

		14MM to -6 Hose Barb Banjo Fitting This banjo fitting allows you to simply use a standard hose and hose clamp. Made of steel so it will not fail on you. This size fits most GT series / ball bearing turbocharger coolant connections....	$11.99 Compare At: $15.99

		14MM x 1.50 Banjo Bolt	$9.99 Compare At: $15.99

		14mm Aluminum Crush Washer Seal Ring for Banjo Fitting	$1.29

		14mm Copper Crush Washer Seal Ring for Banjo Fitting	$0.99

		16mm Copper Crush Washer Seal Ring for Banjo Fitting	$0.99

		18MM to -6 Hose Barb Banjo Fitting This banjo fitting allows you to simply use a standard hose and hose clamp. Made of steel so it will not fail on you. This size fits most T series turbocharger coolant...	$29.99

		18MM x 1.50 Banjo Bolt	$10.99 Compare At: $17.99

		18mm Aluminum Crush Washer Seal Ring for Banjo Fitting	$1.59

		2.75" Premium T bolt Clamp	$5.99 Compare At: $9.99

		3" Premium T bolt Clamp	$5.99 Compare At: $9.99

		3.25" Premium T bolt Clamp	$5.99 Compare At: $9.99

Page 1 of 3.
Go to: 1 | 2 | 3 | ... Next >

Grid View

List View

View:

Sort by: