|
|
|
This product will save your T series turbo from quickly blowing its oil seals. T series turbochargers need a maximum of about 30psi of oil pressure to function properly, exceed this, and eventually...
|
$13.49
Compare At: $17.06
|
|
 |
|
|
|
This is a quick easy way to add a 1/2 NPT port to your stainless or mild steel piece. Simply drill a hole and weld on the bung. "
|
$6.49
Compare At: $8.21
|
|
|
|
|
|
This is a quick easy way to add a 1/4 NPT port to your stainless or mild steel piece. Simply drill a hole and weld on the bung. "
|
$5.49
Compare At: $6.94
|
|
|
|
|
|
This product is designed to gaurd against EGT pyrometer probe failures by pulling the probe further back out of the exhaust stream, reducing mechanical stresses on the probe, while still allowing it...
|
$3.99
Compare At: $5.05
|
|
|
|
|
|
|
$1.79
|
|
|
|
|
|
|
$10.99
Compare At: $14.99
|
|
|
|
|
|
|
$8.99
Compare At: $14.99
|
|
|
|
|
|
|
$0.99
|
|
|
|
|
|
|
$0.99
|
|
|
|
|
|
This banjo fitting allows you to simply use a standard hose and hose clamp. Made of steel so it will not fail on you. This size fits most GT series / ball bearing turbocharger coolant connections....
|
$11.99
Compare At: $15.99
|
|
|
|
|
|
|
$9.99
Compare At: $15.99
|
|
|
|
|
|
|
$1.29
|
|
|
|
|
|
|
$0.99
|
|
|
|
|
|
|
$0.99
|
|
|
|
|
|
This banjo fitting allows you to simply use a standard hose and hose clamp. Made of steel so it will not fail on you. This size fits most T series turbocharger coolant...
|
$29.99
|
|
|
|
|
|
|
$10.99
Compare At: $17.99
|
|
|
|
|
|
|
$1.59
|
|
|
|
|
|
This is ONE replacement connecting rod bolt, that fits all IE connecting rods which use a 3/8" Rod bolt size. This is a high quality bolt made by ARP from ARP2000 Alloy. These are an upgrade from the...
|
$9.99
Compare At: $13.49
|
|
|
|
|
|
This is ONE replacement connecting rod bolt, that fits all IE connecting rods which use a 3/8" Rod bolt size. This is a high quality bolt made by ARP from ARP Custom Age 625+ Alloy. These are an...
|
$28.99
Compare At: $53.37
|
|
|
|
|
|
This is a quick easy way to add a 3/8 NPT port to your stainless or mild steel piece. Simply drill a hole and weld on the bung. This thread fits many GM coolant and air temp sensors. "
|
$5.99
Compare At: $7.58
|
|
|
